LOADING

GENESIS QUICK BUYERS GUIDE

MONOBLOCK AMPLIFIERS
BLACK EDITION MK1
MK1
BLACK EDITION GT1
GT1
1x1000w RMS @ 1 OHM S/N RATIO 110db
1x 500w RMS @ 1 OHM S/N RATIO 110db
1x 1000w RMS @ 2 OHM S/N RATIO 100db
1x 575w RMS @ 2 OHM S/N RATIO 100db LPF MODULE
TWO CHANNEL AMPLIFIERS
BLACK EDTION MK22
BLACK EDITION MK2
MK2
BLACK EDITION GT2
GT2
2×245/450/1x800w RMS @ 4/2/4 OHM S/N RATIO 105db DUAL POWER SUPPLIES
2×145/2351x480w RMS @4/2/4 OHM S/N RATIO 105db DUAL POWER SUPPLIES
2×90/140/1x280w RMS @4/2/4 OHM S/N RATIO 110db SINGLE POWER SUPPLY
2×165/235/1x470w RMS @4/2/4 OHM S/N RATIO 100db SINGLE POWER SUPPLY
2×90/125//1x240w RMS @4/2/4 OHM S/N RATIO 100db SINGLE POWER SUPPLY LPF MODULE
FOUR CHANNEL AMPLIFIERS
BLACK EDITION MK4
MK4
BLACK EDITION GT4
GT4
4×90/140/2x280w RMS@4/2/4 OHM S/N RATIO 110db DUAL POWER SUPPLIES
4×65/100/2x220w RMS@4/2/4 OHM S/N RATIO 105db SINGLE POWER SUPPLIES LPF MODULE
4×120/175/2x220w RMS@4./2/4 OHM S/N RATIO 100db SINGLE POWER SUPPLY
4×65/80/2x150w RMS@4/2/4 OHM S/N RATIO 100db SINGLE POWER SUPPLY LPF MODULE
FIVE CHANNEL AMPLIFIERS
BLACK EDTION MK5
MK5
GT5
4×85/140/2×280/1×270/410/500w RMS 4/2/4/4/2/1 OHM S/N RATIO 105db TRIPLE POWER SUPPLIES
4×65/80/2×170/1×220/330/400w RMS 4./2/4/4/2/1 OHM S/N RATIO 105db DUAL POWER SUPPLIES
4×60/75/2×150/1×275/370w RMS 4/2/4/4/2 OHM S/N RATIO 100db DUAL POWER SUPPLIES
SEVEN CHANNEL AMPLIFIERS
BLACK EDTION MK7
4×85/140/2×280+ 2×145/235+ 1×270/410/500w RMS 4/2/4/4/2/4/2/1 OHM S/N RATIO 105db FIVE POWER SUPPLIES

S/N = SIGNAL TO N0ISE RATIO – the GREATER the db level the greater the signal to distortion ratio, where the average in the industry is only 80db, GENESIS Amplifiers have an average of 105db, the maximum s/n is up 110db>  which is simply incredible because this means nothing but purist audiophile sound will emanate from our stunning MK & GT amplifiers & speakers

OHM / impedance –

Measured here as the amount of speakers, subwoofers or voice coils you can run off a single channel  – the LOWER the ohms the greater the power output & greater the speaker load, However the HIGHER the ohm the greater the control

We always use a 4ohm speaker/subwoofer as a measure,

4 OHM = 1 Speakers / Subwoofers

2 OHM = 2x Speakers / Subwoofers / 1xDual 4ohm Voice coil

1 OHM = 3 x Speakers / Subwoofers/ 2x Dual 4ohm Voice Coil

LOW PASS FILTER MODULE–

To save space certain GT & MK amplifiers are fitted with a low pass filter module socket where passive components are inserted to set the Low pass frequency.